We currently carry a wide range of window moulds for a variety of fixed wing aircraft and helicopters, such as Cessna, Piper, Beechcraft, Bell and Robinson to name a few. Windows can be manufactured according to sample and trimmed to sample size to ensure the perfect fit. Alternatively, windows can be ordered using the aircraft specifications, further trimming may be required for fitting by your maintenance organisation.
Composite aircraft components available include wing, elevator and rudder tips, wheel spats, fairings, cowlings, strut cuffs and tail cones. As with the windows, we carry the moulds for composite components for a variety of different aircraft.
To assist you in the ordering process, please see the part numbering guide below for aircraft and helicopter windows and composite components.
Composite aircraft components available include wing, elevator and rudder tips, wheel spats, fairings, cowlings, strut cuffs and tail cones. As with the windows, we carry the moulds for composite components for a variety of different aircraft.
To assist you in the ordering process, please see the part numbering guide below for aircraft and helicopter windows and composite components.
4. Lower cabin zone
2. Lower cockpit zone
1. Upper cockpit zone
3. Upper cabin zone
Part number : C340-301-01
Key to part number:
C340 = Aircraft identification
3 = Zone
01 = Number from front in zone starting with 01
0 = Outer, 1 = Inner, 2 = Vent or part of, 3 = Bubble type
1 = Left hand, 2 = Right hand, 3 = Centre or unhanded
From Pilot's perspective
Key to part number:
C340 = Aircraft identification
3 = Zone
01 = Number from front in zone starting with 01
0 = Outer, 1 = Inner, 2 = Vent or part of, 3 = Bubble type
1 = Left hand, 2 = Right hand, 3 = Centre or unhanded
From Pilot's perspective
ZONE 1
ZONE 2
ZONE 3
ZONE 4
eg. B206L-201-02 = Bell Longranger chin window Right Hand
STRUT CUFF
WING TIP
ELEVATOR TIP
RUDDER CAP
TAIL CONE
LANDING GEAR CUFF
DORSAL FIN
ENGINE COWLING
WHEEL SPAT
| Component | Code | Position | Code |
| Nose Cone | NC | Upper | UP |
| Engine Fairing / Cowling | EC | Lower | LO |
| Strut Cuff | SC | Not Required | OO |
| Leading Edge Fairing | LE | Left | LT |
| Trailing Edge | TE | Right | RT |
| Wing Tip | WP | Centre | CE |
| Landing Gear Cuff | LG | Not Required | OO |
| Wheel Spat | WS | Left or right from Pilot's perspective | |
| Ventral Fin Fairing | VF | ||
| Dorsal Fin Fairing | DF | ||
| Vertical Stabilizer Tip | VS | ||
| Rudder Cap | RC | ||
| Horizontal Stabilizer Tip | HS | ||
| Elevator Tip | ET | ||
| Tail Cone | TC | ||
| Air Scoop Intake | AS | ||
Part number: (aircraft Identity)-(Component)-(Upper/Lower)-(Left/Right/Centre)
e.g. C182-SC-UP-LT - Cessna 182 Strut Cuff, Upper Left hand
e.g. C182-SC-UP-LT - Cessna 182 Strut Cuff, Upper Left hand
Click to view
CAA MP39
CAA MP39
Click to download Adobe Reader
© 2008 Aces Plastics. All right reserved
Contact webmaster@acesplastics.com
Contact webmaster@acesplastics.com
 |
 |
 |
 |
 |